DREHMEISTER 90° elbow fitting M20 x 1.5 –> M20 x 1.5 external thread

Safety and warning notices

Safety instructions for 90° elbow AG M20 x 1.5 -> M20 x 1.5 ÜM:

1. Please read the manufacturer’s instructions carefully before using the product.

2. Ensure that the elbow is installed correctly to ensure safe use.

3. Check the condition of the elbow regularly and look for signs of wear or damage.

4. Use the elbow only for its intended purpose and do not exceed the specified load limit.

5. Observe the applicable safety regulations and provisions when using the product.

6. Keep the angle piece away from open flames, heat sources and sharp objects.

7. Avoid contact with corrosive chemicals or solvents, as this may cause damage.

8. Switch off the device and disconnect it from the power supply before carrying out any maintenance work.

9. Wear suitable protective equipment, such as gloves and safety goggles, when using the contra-angle handpiece.

10. Follow the manufacturer’s recommended maintenance and cleaning instructions to maintain the functionality of the contra-angle handpiece.

11. If you have any questions or concerns, contact the manufacturer or an authorised specialist.